[ILUG] ADI USB camera

John P. Looney john at antefacto.com
Wed Sep 19 12:04:13 IST 2001


On Wed, Sep 19, 2001 at 11:51:18AM +0100, Fergal Moran mentioned:
> > From: Breathnach, Proinnsias (Dublin) 
> > What ManufacturerID and DeviceID are reported in /proc/usb/* 
> > for the ADI ... is it possible it's a rebadged something else 
> 
> Is this what you mean? What am I looking for?
> 
> [root at excalibur /root]# cat /proc/bus/usb/devices 
> T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
> B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
> D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=0000 ProdID=0000 Rev= 0.00
> S:  Product=USB UHCI Root Hub
> S:  SerialNumber=e000
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
> T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
> D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> P:  Vendor=0422 ProdID=7310 Rev= 0.90
> C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
> I:  If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
> E:  Ad=81(I) Atr=01(Isoc) MxPS=   0 Ivl=  1ms
> I:  If#= 0 Alt= 1 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
> E:  Ad=81(I) Atr=01(Isoc) MxPS= 256 Ivl=  1ms
> I:  If#= 0 Alt= 2 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
> E:  Ad=81(I) Atr=01(Isoc) MxPS= 384 Ivl=  1ms
> I:  If#= 0 Alt= 3 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
> E:  Ad=81(I) Atr=01(Isoc) MxPS= 512 Ivl=  1ms
> I:  If#= 0 Alt= 4 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
> E:  Ad=81(I) Atr=01(Isoc) MxPS= 640 Ivl=  1ms
> I:  If#= 0 Alt= 5 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
> E:  Ad=81(I) Atr=01(Isoc) MxPS= 768 Ivl=  1ms
> I:  If#= 0 Alt= 6 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
> E:  Ad=81(I) Atr=01(Isoc) MxPS= 896 Ivl=  1ms
> I:  If#= 0 Alt= 7 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
> E:  Ad=81(I) Atr=01(Isoc) MxPS=1023 Ivl=  1ms

 I don't see any mention of the camera. You sure it's on, and connected up
?

bartender [1]  cat /proc/bus/usb/devices |grep Prod
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub
P:  Vendor=04a9 ProdID=304e Rev= 0.01
S:  Product=PowerShot A20
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub
P:  Vendor=046d ProdID=c501 Rev= 9.10
S:  Product=USB Receiver

 Shows my powershot. BTW, the latest CVS version of gphoto2 supports the
A20. Excellent ;)

Kate

-- 
_______________________________________
John Looney             Chief Scientist
a n t e f a c t o     t: +353 1 8586004
www.antefacto.com     f: +353 1 8586014





More information about the ILUG mailing list