[ILUG] 3c509 & 2.4.19 problems

[Rick Moen]

Quoting cout at eircom.net (cout at eircom.net):

> You need to run the dos setup program for the 3c509 and turn off plug
> 'n' play in the card's firmware I think you will find.

As Kevin said, the problem can reputedly be solved using Donald Becker's 
Linux-native utilities for the 3C5X9 series.  Turn off PnP, and then set 
the IRQ and I/O base address as required.  Make sure those are also
made available in the motherboard BIOS Setup program to "Legacy ISA
devices" or whatever it's called, there.

-- 
Cheers,              "It ain't so much the things we don't know that get us
Rick Moen            in trouble.  It's the things we know that ain't so."
rick at linuxmafia.com             -- Artemus Ward (1834-67), U.S. journalist