[ILUG] Introductions and info
g.real.ate at gmail.com
Fri Aug 31 15:08:11 IST 2007
yep! thats it perfect! i'm emailing you from the 3 connection now...
the username/password, like you said, was 3ireland/3ireland. so now, step 2,
how do we add this info to the tutorial, it seems like a way easier way to
do it than to get into the ppp connections
On 30/08/2007, Fernando Ciciliati <ciciliati at gmail.com> wrote:
> Hi Andrew,
> Based on the settings you wrote, you could try:
> # wvdial for Vodacom Data. Created by Tazz_tux
> # Version 1.0
> # Change Log:
> # Added support for HSDPA.
> # Added Headers and version control.
> # Added trial settings for 3ireland.ie
> [Dialer Defaults]
> Phone = *99#
> Username = username
> Password = password
> Stupid Mode = 1
> Dial Command = ATDT
> [Dialer hsdpa]
> Modem = /dev/ttyUSB0
> Baud = 460800
> Init2 = ATZ
> Init3 = ATE0 V1 &D2 &C1 S0=0 +IFC=2,2
> ISDN = 0
> Modem Type = Analog Modem
> Init5 = AT+CGDCONT=1,"IP"," 3ireland.ie"
> About the username and password parameters, I don't know if their values
> are considered by the 3 authentication system...
> If they are, I think you will have to figure them out.
> I would try 3ireland/3ireland as a start.
> You can also install the stuff on Windows and look for some tip
> in the configuration files...
> Good luck!
> > Hello everyone,
> > Just found you guys there today, would have been on this list ages ago
> if i
> > had known about it. I live in dublin and am an active developer with
> > So.. onto business ;) i found the guide to use the 3 usb modem and i
> > like to start a discussion with the author, Mikhail Ramendik. I don't
> > very much about this sort of connectivity but i would like to ask how
> > details provided would translate to the guide posted here ::
> > http://ubuntuforums.org/showthread.php?t=262867
> > the important part being the wvdial instructions:
> > # wvdial for Vodacom Data. Created by Tazz_tux
> > # Version 1.0
> > # Change Log:
> > #
> > # Added support for HSDPA.
> > # Added Headers and version control.
> > [Dialer Defaults]
> > Phone = *99***1#
> > Username = username
> > Password = password
> > Stupid Mode = 1
> > Dial Command = ATDT
> > [Dialer hsdpa]
> > Modem = /dev/ttyUSB0
> > Baud = 460800
> > Init2 = ATZ
> > Init3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> > ISDN = 0
> > Modem Type = Analog Modem
> > and how that translates from the details provided on you're website :
> > OK ATE0V1&D2&C1S0=0+IFC=2,2
> > OK AT+CGDCONT=1,"IP"," 3ireland.ie"
> > OK ATDT*99#
> > CONNECT ""
> > to clarify my inquiry, i would like to know how to use the details
> > that you have provided in the context of wvdial
> > Thank you,
> > Andrew / real_ate
More information about the ILUG